Your Location： Home → Product → Stepping Driver Series

Product

Products /

DM432ES

release time: 2019 - 01 - 07

DM432ES is a digital stepper motor driver launched by Dongfang Servo CNC Technology Co., Ltd., using the latest 32-bit DSP technology, the user can set any subdivision in 256 and any current value in the rated current. Due to the use of low-speed/medium-speed anti-resonance technology, the built-in micro-division technology, even in low subdivision conditions, can achieve a high subdivision of the effect, low and high speed operation are very smooth, the noise is super small. The drive interior integrates the parameter automatic tuning function, can automatically generate the optima...

More>>
M542ES

release time: 2019 - 01 - 07

M542ESM542es type drive, is the Oriental Servo CNC Technology Co., Ltd. launched, with a more cost-effective advantage of stepper motor driver. The heat and noise of the motor machine are greatly reduced, and the running stability is higher. It is mainly used to drive 42. Type 57 Two-phase hybrid stepper motor. There are 15 kinds of micro-step fine fractions, the maximum number of steps is 25600pulse/rev; Its working peak current range is 1.04a-4.2a, the output current has a total of 8 gears, the current resolution is about 0.45A, with automatic half-flow, overvoltage and overcurrent protectio...

More>>
MD556ES

release time: 2019 - 01 - 07

MD556ESMD556ES is a stepper motor driver with constant angular moment and high subdivision, which adopts servo pure sinusoidal precise current control technology. The technology can significantly improve the noise and smooth operation of the motor. The maximum driving current is 5.6A, and the maximum positioning accuracy is 128 Shao fen, which can reach 25600 steps.application areaSuitable for all kinds of automation equipment and instruments of motion control, such as electronic processing and testing, semiconductor packaging, laser cutting and welding, laser phototypesetting, packaging machi...

More>>

More>>

Contact information

Tel：0755-83314220

Fax：0755-83314221

E-mail：sales@eastservo.cn

Shenzhen · China

Address: 4A, Building 1, Area B, No. 1, Shajing Road, Dawangshan, Shajing Town, Baoan District, Shenzhen, (opposite Huasheng Daxia)

Name： 3M2060

Listing date：2019-01-07

share to：

3M2060

Product Description： 3M2060 is a high subdivision three-phase stepper motor driver designed and developed with patent technology. It is suitable for driving all kinds of three-phase hybrid stepper motors of 86-130 type. Because of the advanced precise pure sinusoidal current control technology, the noise and vibration of the stepper motor can be greatly reduced, which makes the noise and stability of the stepper motor running close to the level of the servo motor. Compared with most similar subdivision drive products in the market, the calorific value of stepper motor and driver decreases by 15-30%.

Fabric：

Category：

Types of：

Color：

Model：

Product Description
Product Specifications
Parameter

3M2060 is a high subdivision three-phase stepper motor driver designed and developed with patent technology. It is suitable for driving all kinds of three-phase hybrid stepper motors of 86-130 type. Because of the advanced precise pure sinusoidal current control technology, the noise and vibration of the stepper motor can be greatly reduced, which makes the noise and stability of the stepper motor running close to the level of the servo motor. Compared with most similar subdivision drive products in the market, the calorific value of stepper motor and driver decreases by 15-30%.

application area

Suitable for all kinds of large and medium-sized automation equipment and instruments, such as: engraving machine, labeling machine, cutting machine, laser phototypesetting, plotter, CNC machine tool, holding and placing device, etc. The effect is excellent in the large torque equipment with low vibration, low noise, high precision and high speed.

Driver Most Functional Description

1) Micro-step subdivision number setting: the driver micro-step subdivision number is set by four digital switches SW5-SW8. It has 16 most step subdivisions. When the user sets the micro-step subdivision, the driver should stop running first. For setting the number of the most step components, please specify the layout of the driver.

2) Output current setting: Three code-raising switches SW1-SW3 are used to drive the guaranteed output radio wave, and their output current has a common side. Specific output current setting. Please refer to the instructions for driving face-curing plate.

3) Automatic half-stream function. Users can use SW4 to set the most automatic half-stream function. OFF indicates that the static current is set to half of the dynamic current, and ON indicates that the alarm current is the same as the dynamic current. In general use, SW4 should be set as OFF, which can reduce the heat of motor and driver and improve the reliability. After the stop of the pulse train, the current of about 0.4 is automatically reduced to about - half (60% of the actual value), and the fever is theoretically reduced by 36%.

4) Signal interface: PUL+and PUL-are the positive and negative end of control pulse signal; DIR+and DIR-are the positive and negative end of direction signal; ENA+and ENA-are the positive and negative end of enablement sign.

5) Motor interface: U, V, W correspond to the motor winding line U,V,W, arbitrarily adjust two of the three winding lines, which can change the direction of the motor.

6) Power interface: DC power supply is used, and the working voltage range is 80-220VAC.

7) Indicator light: The driver has two red and green indicators. Among them, the green light is the indicator of power supply, and the green light is always on when the driver E is electrified. The red light is always on when there is over-voltage and over-current barrier, so the chandelier is always on. After the trouble is cleared, the red light goes out. When the driver fails, only re-energizing and new enablers can clear the credit failure.

8) Installation instructions: The external dimension of the driver is 197x105x86m and the installation hole spacing is 183mm. It can be installed horizontally and vertically. Vertical installation is recommended. When installing, it should be attached to the metal cabinet to facilitate heat counting.

Parameter setting

The 3M2060 driver uses a dial switch to set subdivision accuracy, dynamic current and half-current.

Detailed description is as follows:

3M2060

Working current setting:

Output mean current	SW1	SW2	SW3
1.3A	off	off	off
1.8A	on	off	off
2.5A	off	on	off
3.1A	on	on	off
3.7A	off	off	on
4.3A	on	off	on
5.0A	off	on	on
5.6A	on	on	on

Microstep Component Setting:

Steps / turn	SW5	SW6	SW7	SW8
200	off	off	off	off
400	on	off	off	off
500	off	on	off	off
800	on	on	off	off
1000	off	off	on	off
1250	on	off	on	off
1600	off	on	on	off
2000	on	on	on	off
2500	off	off	off	on
3200	on	off	off	on
4000	off	on	off	on
5000	on	on	off	on
6400	off	off	on	on
8000	on	off	on	on
10000	off	on	on	on
12800	on	on	on	on

Installation dimensions:

3M2060

Previous： 3MD883ESNext:No

Related Suggestion / more

DM432ES

DM432ES is a digital stepper motor driver launched by Dongfang Servo CNC Technology Co., Ltd., using the latest 32-bit DSP technology, the user can set any subdivision in 256 and any current value in the rated current. Due to the use of low-speed/medium-speed anti-resonance technology, the built-in micro-division technology, even in low subdivision conditions, can achieve a high subdivision of the effect, low and high speed operation are very smooth, the noise is super small. The drive interior integrates the parameter automatic tuning function, can automatically generate the optimal operation parameter for different motor, maximizes the performance of the motor. Through PC software or handheld programmer debugger, set pulse rise or drop trigger is effective, you can also set a single pulse mode or dual pulse mode.application area Combined with a variety of sports control field automation equipment and instruments, such as: electronic processing and testing, semiconductor packaging, laser cutting and welding, laser imagesetter, packaging machinery, engraving machine marking machine, cutting machine, garment plotter, CNC machine tools, automated assembly equipment. Is that the user expects low noise. High performance and superior price than competitive areas of the preferred choice!Driver Function Operation Instructions1) Micro-step Group score settings: By SW5-SW8 four digital switches to set the drive micro-step subdivision teaching, which has a total of 15 micro-step subdivision. When the user sets a micro-step subdivision, the drive should be stopped to run first.For specific micro-step subdivision settings, please see the drive surface layout description. 2) Output current setting: By SW1-SW3 three connector switch to set the drive output current, its output current has a total of 8 gears.For the setting of the specific output current, see the drive surface description. 3) Automatic half-flow function: The user can set the automatic half-stream function of the drive through the SW4. Off indicates that the static power is set to half of the dynamic current, and on indicates that the static current is the same as the dynamic current. SW4 should be set to off in general use, resulting in reduced energy consumption and increased reliability of motors and drives.After the pulse string stops about 0.4s, the current is automatically reduced to about half (60% of the actual value), and the heat is theoretically reduced by 36%.4) Signal Interface:Pul+ and pul-are the positive and negative ends of the control pulse signal: dir+ and dir-are the positive and negative ends of the directional signal: ena+ and ena-are the positive and negative ends of the enabling signal.5) Motor Interface:A+ and a-are connected to the positive and negative ends of the motor A-phase winding: the positive and negative end of the B-phase winding of the b+ and b-Stepper motor: In any one phase of a phase or B phase two phases, the wiring of the winding can be reversed in the direction of the motor.6) Power Interface:Using DC power supply, operating voltage range dare to 18-40VDC, power supply power greater than 100W.7) Indicator light: The drive has a red and green two LEDs. Where the green light is the power led. When the drive on the green light is always lit, the red light is the fault indicator light, when there is overvoltage, overcurrent failure, the fault light is often lit. After the fault is cleared, the red light is extinguished.In the event of a drive failure, the failure can only be cleared by re-power and re-enabling. 8) Installation instructions: The driver's dimensions are: 96x60.5x24.5m, An Zingkong distance is 90mm, can be horizontal or vertical installation, construction using vertical installation. When installing. It should be pressed close to the metal cabinet for the benefit of heat dissipation.Parameter settingThe driver of DM432ES prefers to use human-dial switch to set subdivision precision dynamic current and half-current full-output peak current output mean current SW1 SW2 SW3 current. Detailed description but below: Working current setting Output peak currentOutput mean currentSW1SW2SW31.1A0.8Aononon1.4A1.0Aoffonon1.7A1.2Aonoffon2.0A1.4Aoffoffon2.3A1.6Aononoff2.6A1.9Aoffonoff2.9A2.1Aonoffoff3.2A2.3Aoffoffoff Micro step subdivision settingSteps / turnSW5SW6SW7SW8400offononon800onoffonon1600offoffonon3200ononoffon6400offonoffon12800onoffoffon25600offoffoffon1000onononoff2000offononoff4000onoffonoff5000offoffonoff8000ononoffoff10000offonoffoff20000onoffoffoff25000offoffoffoffInstallation dimensions:

Member Price：￥ 0 RMB

Market Price：￥ 0 RMB

Release Time： 2019 - 01 - 07
M542ES

M542ESM542es type drive, is the Oriental Servo CNC Technology Co., Ltd. launched, with a more cost-effective advantage of stepper motor driver. The heat and noise of the motor machine are greatly reduced, and the running stability is higher. It is mainly used to drive 42. Type 57 Two-phase hybrid stepper motor. There are 15 kinds of micro-step fine fractions, the maximum number of steps is 25600pulse/rev; Its working peak current range is 1.04a-4.2a, the output current has a total of 8 gears, the current resolution is about 0.45A, with automatic half-flow, overvoltage and overcurrent protection and other functions. The operating power supply of this drive is DC power supply, the recommended operating voltage range is 24-48VDC, the recommended typical operating voltage is 36VDC.application areaSuitable for a variety of sports control field automation equipment and instruments, such as: electronic processing and testing, semiconductor packaging, laser cutting and welding, laser imagesetter, packaging machinery, engraving machine, marking machine, cutting machine, garment drawing enclosures, CNC machine tools, automated assembly equipment. It is the first choice for users to expect low noise, superior high speed performance and strong competitive price.Driver Function Description1) Micro-step subdivision settings: The drive micro-step subdivision is set by the SW5-SW8 four dial switch, which has a total of 15 micro-step subdivision. When the user sets a micro-step subdivision, the drive should be stopped to run first.For the setting of the specific micro-step fine fraction, please refer to the drive surface layout description.2) Output current setting: The drive output current is set by the SW1-SW3 three dial switch, with a total output current of 8 gears.For the setting of the specific output current, please refer to the drive surface layout description.3) Automatic half-current function: The user can set the automatic half-stream function of the drive by SW4. Off indicates that the static current is set to half of the dynamic current, and on indicates that the static current is the same as the dynamic current. The SW4 should be set off in general use, resulting in less heat and increased reliability of the motor and drive.About 0.4s of the current automatically becomes 50% (55% of the actual value) after the pulse stops, and the heat is theoretically reduced by 65%.4) Signal Interface:PUL+ and PUL-are the positive and negative ends of the control pulse signal: DIR+ and DIR-are the positive and negative ends of the directional signal: ENA+ and ENA-are the positive and negative ends of the signal.5) Motor Interface: A+ andA-connect the positive and negative ends of the stepper motor A phase winding; B+ and B-connect the positive and negative ends of the B-phase winding of the motor.When the winding wiring of any phase in A and B phase is swapped, the direction of the motor can be reversed.6) Power Interface:Powered by a DC power supply, the operating current range is recommended for 24-48VDC. Power supply power greater than 100W.7) Indicator light: The drive has a red and green two LEDs. One of the green light for the power led, the drive on the green light is always lit, red lights for the fault indicator, when there is overvoltage, overcurrent failure, the fault lights are often lit. After the fault is cleared, the red light is extinguished.In the event of a drive failure, the failure can only be cleared if it is re-charged or re-enabled.8) Installation Instructions: The dimensions of the drive are: 118x75.5x35mm, installation spacing of 112mm, can be horizontal or vertical installation, it is recommended to use vertical installation.When installing, it should be affixed to the metal cabinet to facilitate heat dissipation.Parameter setting:The M542ES driver uses an eight-bit code-aid switch to set the subdivision accuracy, dynamic current and half-current full-output peak trajectory output mean SW1 SW2 SW3. Detailed description is as follows:Working current settingOutput peak currentOutput mean currentSW1SW2SW31.00A0.71Aononon1.46A1.04Aoffonon1.91A1.36Aonoffon2.37A1.69Aoffoffon2.84A2.03Aononoff3.31A2.36Aoffonoff3.76A2.69Aonoffoff4.20A3.00AoffoffoffMicro-setting:Steps / turnSW5SW6SW7SW8400offononon800onoffonon1600offoffonon3200ononoffon6400offonoffon12800onoffoffon25600offoffoffon1000onononoff2000offononoff4000onoffonoff5000offoffonoff8000ononoffoff10000offonoffoff20000onoffoffoff25000offoffoffoffInstallation dimensions:

Member Price：￥ 0 RMB

Market Price：￥ 0 RMB

Release Time： 2019 - 01 - 07
MD556ES

MD556ESMD556ES is a stepper motor driver with constant angular moment and high subdivision, which adopts servo pure sinusoidal precise current control technology. The technology can significantly improve the noise and smooth operation of the motor. The maximum driving current is 5.6A, and the maximum positioning accuracy is 128 Shao fen, which can reach 25600 steps.application areaSuitable for all kinds of automation equipment and instruments of motion control, such as electronic processing and testing, semiconductor packaging, laser cutting and welding, laser phototypesetting, packaging machinery, engraving machine, marking machine, cutting machine, clothing plotter, CNC machine tool, automatic assembly equipment, etc. It is the first choice in the field where users expect low noise, high speed performance and cost-effective competition.Driver Function Description1) Micro-step subdivision number setting:Four dial switches SW5 SW8 are used to set the micro-step subdivision number of the driver. There are 15 most-step subdivisions. When the user sets the most step subdivision, the driver should stop running first. For setting the number of micro-steps, please specify the layout of the driver.2) Output current setting:The output current is set by SW1-SW3 three child code switches, and there are 8 output currents. For the specific setting of the output current, please refer to the driver layout instructions.3) Automatic half-stream function:Users can use SW4 to set up automatic half-built functions to drive riots. OFF denotes that the static current is set to half of the dynamic current, and ON denotes that the dynamic current is the same as the dynamic current. Sw4 should be set as OFF in general use, so that the heating of motor and wing actuator can be reduced and the reliability can be improved. After the stop of the pulse train, the current will automatically be reduced to about half (60% of the actual value), and the fever will theoretically be reduced by 36%.4) Signal interface:PUL + and PUL- are the positive and negative end of the control pulse signal, DIR + and DIR - are the positive and negative end of the direction signal, ENA + and ENA-are the positive and negative end of the enabling signal.5) Motor interface:The positive and negative ends of A + and A - connected stepping motor A winding: the positive and negative ends of B + and B - connected stepping motor B phase firing group. When the A. B two-phase isolation group is switched, the direction of the motor can be reversed.6) Power interface:DC power supply is adopted. The working voltage range is recommended to be 20-50VDC, and the power supply is more than 200W.7) Indicator lights:There are two red and dry indicator lights in the driver. The edge lamp is the telephone indicator lamp. When driving Beiyi to power, the green lamp is always red to indicate the fault. When overvoltage and overrequest occur, the fault lamp is always on. After the barrier is cleared, the red light goes out. When the driver fails, only re-energizing and re-enabling can remove the failure.8) Installation instructions:The size of the driver is 118x75.5x35m, and the distance between mounting holes is 112 mm. It can be installed either horizontally or vertically. Vertical installation is adopted in the construction. When installed, the leather is installed on the closing cabinet to facilitate heat dissipation.Parameter settingThe MD556ES driver uses a human code aid switch to set paper accuracy, dynamic current and half-current. Detailed description is as follows:Working current setting:Output peak currentOutput mean currentSW1SW2SW31.4A1.0Aoffoffoff2.1A1.5Aonoffoff2.7A1.9Aoffonoff3.2A2.3Aononoff3.8A2.7Aoffoffon4.3A3.1Aonoffon4.9A3.5Aoffonon5.6A4.0AonononMicro-setting:Steps / turnSW5SW6SW7SW8400offononon800onoffonon1600offoffonon3200ononoffon6400offonoffon12800onoffoffon25600offoffoffon1000onononoff2000offononoff4000onoffonoff5000offoffonoff8000ononoffoff10000offonoffoff20000onoffoffoff25000offoffoffoffInstallation dimensions:

Member Price：￥ 0 RMB

Market Price：￥ 0 RMB

Release Time： 2019 - 01 - 07